Fawn Sales Inc Model #2051 snack vending machine trouble. Thats whats on the plate riveted to the back anyway. Nothing else indicating something different I could find.
Anyone here know anything about these. I have one thats refusing to vend, and is spitting out a few codes but we have no manual to know what they mean.
Its been disassembled and cleaned with no change.
error codes being displayed are C01, C07, and C08.
This is a fairly old machine. If anyone knows anything about it or has a user manual they can scan or email it would be much appreciated.
5 replies to this topic
#2
Eman
-
- Members
-
- 23 posts
Member
Posted 11 October 2007 - 08:09 AM
Fawn Sales Inc Model #2051 snack vending machine trouble. Thats whats on the plate riveted to the back anyway. Nothing else indicating something different I could find.
Anyone here know anything about these. I have one thats refusing to vend, and is spitting out a few codes but we have no manual to know what they mean.
Its been disassembled and cleaned with no change.
error codes being displayed are C01, C07, and C08.
This is a fairly old machine. If anyone knows anything about it or has a user manual they can scan or email it would be much appreciated.
Fawn was / is affliated with Wittern group. Try there website they have service manuals online
#3
boneheaddoctor
-
- Members
-
- 3 posts
Newbie
Posted 11 October 2007 - 01:04 PM
Thanks..I will do that.Fawn was / is affliated with Wittern group. Try there website they have service manuals online
#4
boneheaddoctor
-
- Members
-
- 3 posts
Newbie
Posted 15 October 2007 - 01:06 PM
I'm still waiting for a response from The Wittern Group. In the mean time does anyone have any idea what some of these error codes are...we're going on 2 weeds with a non-working machine.Thanks..I will do that.
#5
coinvestor
-
- Members
-
- 325 posts
Advanced Member
Posted 15 October 2007 - 07:50 PM
I'm still waiting for a response from The Wittern Group. In the mean time does anyone have any idea what some of these error codes are...we're going on 2 weeds with a non-working machine.
Maybe it would help if you laid off the weeds
JKI got board the other night and looked everywhere I could not find one. Then I was thinking that the controller must have been used in other machines (different models) and the error codes would be the same, but no luck.
Its funny I have always had good responses from wittern, but I called friday to buy a machine then again today and I have not gotten a response yet.
JD
#6
BVI
-
- Members
-
- 402 posts
Advanced Member
Posted 16 October 2007 - 07:58 PM
I'm still waiting for a response from The Wittern Group. In the mean time does anyone have any idea what some of these error codes are...we're going on 2 weeds with a non-working machine.
You need to ask to speak with Bob Floyd. He's one of the service techs, and he is extremely good. Sometimes you have to wait a little bit to get him, but if you're really stuck, he can get to the root problem real fast. You need to be in front of your machine when you call. Use your cell phone.
All the techs are good, but Bob is exceptional.
