2 replies to this topic

[frntrange]

I can't seem to find a vend motor for this classic Vendo. I am new to vending machine repair, so I don't know all the supply channels for the older equipment.

Don't really need the gearcase or cams, just the coil and armature, but will take what I can get.

Anyone have one available from an old machine? I can use the single or double row vend motor.

Thanks in advance for your help.

Steve Colvin

Mountain States Vending
PO Box 553
Brighton, CO 80601

877.303.8363
steve.colvin@mountainstatesvending.com
www.MountainStatesVending.com

[clvending]

Hey neighbor,

I am located in Boulder County. I have locations in Lafayette, Louisville, Broomfield an Boulder. I am not sure what you need, but you can check out http://vendingworld.com/ to see if they have your part. I bought my machines from them. They have put me in contact w/ their repair guy who help solve my problem over the phone. He saved me a service repair call.

Good Luck

Lee

C&L Vending Services, LLC

[frntrange]

Hey neighbor,

I am located in Boulder County. I have locations in Lafayette, Louisville, Broomfield an Boulder. I am not sure what you need, but you can check out http://vendingworld.com/ to see if they have your part. I bought my machines from them. They have put me in contact w/ their repair guy who help solve my problem over the phone. He saved me a service repair call.

Good Luck

Lee

C&L Vending Services, LLC

Thanks Lee, I've been to their site many times, but didn't notice the links for parts at the top of the page for Vendo, DN, AP etc. I ordered a vend motor from them that looks like it might be the correct one, saved quite a bit from a quote at Happ too

Let's do lunch sometime