I'm New here, and new to Vending machines.
I have a Narco 600e 9 selection machine, and I tried putting in 20 oz gatorade and 20 oz vitamin water. But the columns are too small toward the bottom, they just don't fit...
Do I need shims.? and if so what kinda shim do I need.?
Any help would be greatly appreciated..!!!!
Also, how do I change the pricing.?
Thanks for your time..
2 replies to this topic
#2
rookie514
-
- Members
-
- 14 posts
Member
Posted 16 October 2008 - 11:57 AM
You need to make sure that the rod is removed and that you have the 20 oz bottle shim in there. The can shim has one 90 degree angle while the 20 oz is much skinnier and has 2 90 degree angles. once that is done make sure you adjust the brown cam setting, if the lable is still attatched to the inside of the machine it should illustrate this. Good luck!!!
#3
curseto
-
- Members
-
- 2 posts
Newbie
Posted 18 October 2008 - 07:56 PM
You need to make sure that the rod is removed and that you have the 20 oz bottle shim in there. The can shim has one 90 degree angle while the 20 oz is much skinnier and has 2 90 degree angles. once that is done make sure you adjust the brown cam setting, if the lable is still attatched to the inside of the machine it should illustrate this. Good luck!!!
Thanks so much for your help, I ordered some new shims today. Is it pretty easy to make the shim switch..? I was told I have to make some adjustments for the shims to fit in there... Sorry I'm totally new to this but I'm figuring it out quite fast...
