I just got an AP snackshop 7600 and it keeps homing. The A4, B4, C4, & F4 will take a 1/2 turn every time I close the door. It seems to work sometimes though, then I set the prices or open the drawers and it won't work again. The only useful info the manual has is it is some kind of short. Does anybody have experience with tracking this down? I haven't had time to start taking the machine apart yet and it would be nice to know where to look first.
Thanks
2 replies to this topic
#1
For The Kids Vending
-
- Members
-
- 119 posts
Advanced Member
- Gender:Male
Posted 26 November 2010 - 01:58 PM
#2
RJT
-
- Members
-
- 367 posts
Advanced Member
- Gender:Male
Posted 26 November 2010 - 07:18 PM
I just got an AP snackshop 7600 and it keeps homing. The A4, B4, C4, & F4 will take a 1/2 turn every time I close the door. It seems to work sometimes though, then I set the prices or open the drawers and it won't work again. The only useful info the manual has is it is some kind of short. Does anybody have experience with tracking this down? I haven't had time to start taking the machine apart yet and it would be nice to know where to look first.
Thanks
Do you have an extra known working control board you can try? I would try that first.
#3
Putz
-
- Members
-
- 25 posts
Member
Posted 28 November 2010 - 01:56 PM
You could also try the board that runs just the trays sorry if that is which one you are talking about forthekidsvending.
