4 replies to this topic

[Thumperx2]

I just got a Dixie - Narco 6 selection pepsi vend and the problem is, vend slot number 3 will continuosly vend until empty. No coins needed, just activate the switch with soda and it keeps running. Number 5 slot works as it is supposed to and all the rest, numbers 1,2,4,& 6, will not vend at all. I checked selection switches and they all seem fine.Out of stock switches seem fine too. Cam positions are just how the manuel says to set them. Im no expert but everything appears to be the way it should. Any suggestions would be greatly appreciated. Thank you in advance.

[vend1ng]

I just got a Dixie - Narco 6 selection pepsi vend and the problem is, vend slot number 3 will continuosly vend until empty. No coins needed, just activate the switch with soda and it keeps running. Number 5 slot works as it is supposed to and all the rest, numbers 1,2,4,& 6, will not vend at all. I checked selection switches and they all seem fine.Out of stock switches seem fine too. Cam positions are just how the manuel says to set them. Im no expert but everything appears to be the way it should. Any suggestions would be greatly appreciated. Thank you in advance.

Read the posting "Dixie Narco 440 Column Continuously Vends " see if that doesn't help you. If not I'll see what I can do.Just a thought.
Vend1ng

[CoinTech]

Check the homing switches on the delivery motor cams. It they are not opening in the groove it will vend continuously.

[vend1ng]

Check the homing switches on the delivery motor cams. It they are not opening in the groove it will vend continuously.

That will cause it to vend continuosly with or without pop. He said it only starts when he activates the sold out switch. Just a thought.
Vend1ng

[vendit1]

Sounds like there's a problem with the braking system on the motor, it could be sticky or the white plastic piece could be broken also small spring might be a problem.