Hi, I am hoping someone can help me out!! I have a Lektro-Vend VS-99A vending machine that works great. It has been a real good machine. It has never had a bill acceptor on it. I bought a fully rebuilt Mars L005 to put on it ( all the wiring was still there!!) and when I put the dollar in it shows as a credit,make your selection and it tells you the price and doesn't give it to you and it keeps your dollar! Also if you put a dollar in and hit the refund it just dissappears. It is like I am missing a programming setup?? Also when you put 1 buck in it counts as one,Put a second one in and it then counts as 4 more giving a total of 5 credits for 2 bucks??? Any help would be great,Thanks
3 replies to this topic
#2
VMQueen
-
- Members
-
- 3 posts
Newbie
Posted 26 August 2015 - 06:12 AM
Hi. I am new to the vending world, and I have a Lektro Vend that is giving me the same problem. When I put a dollar in, it will not vend, and it will not return the dollar. Did you ever find a solution to this problem? Thanks.
#3
AZVendor
-
- Members
-
- 553 posts
Advanced Member
Posted 03 September 2015 - 07:12 PM
It sounds like you have a bad bill validator that needs to be rebuilt. If you need a rebuilt unit you can PM me for information.
#4
AZVendor
-
- Members
-
- 553 posts
Advanced Member
Posted 03 September 2015 - 07:12 PM
It sounds like you have a bad bill validator that needs to be rebuilt. If you need a rebuilt unit you can PM me for information.
