Jump to content

- - - - -

vendo 475 various issues

  • Please log in to reply
1 reply to this topic

#1 nrod7



  • Members
  • PipPip
  • 14 posts

Posted 26 January 2017 - 11:46 PM

1. Coinco BA50A validator- blinking (message bill path blocked)  


2. Mars trc 6800 or 6000 - plugged in and filled with coins, red light indicator not on ( next to toggle switches for vend price setting).  Will not accept coin,


    but the payout switches will dispense the coins out of the fill tubes


3. Column one works fine.  I can push vend switch on the motor and it turns.  All the other motors will not turn when pushing vend switch. However, I


    switched the wiring harness connected to vend motor on column one to column 2 and the motor turned.  I found no loose or broken connection on            




Are these three problem related?


I have do have parts,  but could not get the machine working today.  


Will have to go back out tommorrow.



#2 Technivend


    Advanced Member

  • Members
  • PipPipPip
  • 97 posts
  • Gender:Male
  • Location:Boston

Posted 12 March 2017 - 10:08 AM

If you haven't figured this out check the switch on motor 1. If you do not continue the circuit through the switch it will shut the machine down and show the symptoms you describe