Learned how to run Monsters in a Dixie Narco 276 E (thanks AZ). Today, I bought a Dixie Narco 276, If its possible to run Monsters (bottles) 2 deep, what
needs to be change on the settings? All the columns are single stack.
Thanks,
nrod7
Posted 24 August 2015 - 10:46 PM
Learned how to run Monsters in a Dixie Narco 276 E (thanks AZ). Today, I bought a Dixie Narco 276, If its possible to run Monsters (bottles) 2 deep, what
needs to be change on the settings? All the columns are single stack.
Thanks,
nrod7
Posted 25 August 2015 - 06:23 AM
If all the columns are narrow then this is also an E model. I'm not aware of Monster being available in a bottle and there are no vend tests for anything other than a can. If it's a 20 oz bottle then you'll at the least need a bottle shim in the column and maybe set your motor cam to #5. It should do 2 deep vending that way if the bottles aren't too tall. Let me know if you need a shim.
Posted 25 August 2015 - 10:04 AM
My mistake ( This Texas heat really ate my lunch yesterday) The question remains the same, I stand corrected. I meant how set for 16 oz monster cans?
Thanks,
nrod7
Posted 25 August 2015 - 02:08 PM
You will need a can shim and the rod for cans. The rod should be placed in the center holes and the cam set for two deep cans.
Posted 26 August 2015 - 12:10 PM
Gotcha! simple enough.
Thanks to you all.
nrod7