Changing from one bill acceptor to another
#1
Posted 19 April 2011 - 05:56 PM
#2
Posted 19 April 2011 - 06:09 PM
#3
Posted 20 April 2011 - 02:11 PM
#4
Posted 20 April 2011 - 03:27 PM
#5
Posted 20 April 2011 - 07:01 PM
Could you supply the model number of the coin mech, that would be helpful.Well, the bill acceptor that is currently installed is a Coinco model BA30B... I would like to put a MEI AE2411U5 on this, however the cable hook up is different... I also need to mention there is a coinco coin acceptor installed as well... The cable connects both the coin and bill acceptor together, then has another connection leading up to the PCB inside the machine... What I'm hoping is that it's just a simple cable change, but I could be wrong...
#6
Posted 21 April 2011 - 03:19 PM
Could you supply the model number of the coin mech, that would be helpful.
The coin mech is also a Coinco, model number 9302-GX...
#7
Posted 22 April 2011 - 10:26 AM
#8
Posted 22 April 2011 - 01:43 PM
#9
Posted 22 April 2011 - 01:56 PM
#10
Posted 22 April 2011 - 01:59 PM
#11
Posted 22 April 2011 - 02:01 PM
#12
Posted 22 April 2011 - 07:04 PM
I'm sorry, I misread your MEI model number and thought it was a 24V, which would only need a harness. As posted by H4UV, you would need a MEI VN2502, or 2512.You wanted to upgrade to a Mars validator, so you will be taking the CoinCo validator out anyway. The Mars Y harness from Vendor's Exchange will only work on Mars validators, like the VN.
#13
Posted 13 June 2011 - 07:44 PM
Any suggestions???
#14
Posted 13 June 2011 - 09:20 PM
#15
Posted 14 June 2011 - 05:37 AM
Thanks for the info!!!
#17
Posted 14 June 2011 - 06:47 PM
#18
Posted 23 June 2011 - 06:49 AM
When you are using MDB, you are just adding devices to a series of connections. The harness you looked at is the MEI factory harness. If the coin mech is MDB you usually do not need a long cable to hook into the MDB line as the coin mech and bill acceptor are usually mounted in close proximity.That looks like the right one, however it doesn't appear to be long enough from the picture... I'll have to contact them to see how long it is..