I recently aquired this Pepsi vending machine. It is a Cavalier model c10-480mc-320. It is clearly missing some type of electronics inside. there is a 6-pin plug going into the wiring harness that isnt plugged into anything, and there are two green ground wires not attached to anything.
The machine gets cold and seems to be in decent shape physically. I was told it works good but needs a relay to work again. I know nothing about vending machines but I would like to get this one working again if possible. any help would really be appreciated
sorry pictures are sideways. image hosting site turned them
What part am I missing?
Started by fosco, May 10 2016 11:54 AM
3 replies to this topic
#1
Posted 10 May 2016 - 11:54 AM
#2
Posted 25 June 2016 - 09:11 AM
The harness from your coin mech includes pigtails for different kinds of bill validators. The loose one there is used for Maka or Coinco validators but you have a Mars installed and that's why you're using the 9 pin connector.
#3
Posted 25 June 2016 - 09:12 AM
Additionally, the ground wires should be grounded under a nearby nut. Don't worry about the unused 6 pin connector.
#4
Posted 25 June 2016 - 09:20 AM
Other than that you could have a bad coin mech or a vend motor stuck in the vend position.