Jump to content

Close
Photo
- - - - -

Need bill validator info for USI CD6SA drink machine

Started by Vic, Aug 18 2012 03:47 PM
bill validator USI drink vending soda vending

  • Please log in to reply
1 reply to this topic

#1 Vic

Vic

    Advanced Member

  • Members
  • PipPipPip
  • 96 posts

Posted 18 August 2012 - 03:47 PM

Hello again...I purchased a USI CD6SA soda machine with a coin mech (Coinco 9302 24v) but no bill acceptor. I read the manual and it said the machine is validator ready, but there was no mention of the proper validator, harness, etc. Machine is 115v. Would the acceptor also be 115v? Or, would it be 24v like the coin mech? There is an unused 3 pin plug coming from the control board. Any info about the correct validator would be appreciated.

Regards,

Vic

#2 MVSJOHN

MVSJOHN

    Advanced Member

  • Members
  • PipPipPip
  • 78 posts
  • Gender:Male
  • Location:LAKELAND,FL

Posted 19 August 2012 - 05:08 PM

Hello again...I purchased a USI CD6SA soda machine with a coin mech (Coinco 9302 24v) but no bill acceptor. I read the manual and it said the machine is validator ready, but there was no mention of the proper validator, harness, etc. Machine is 115v. Would the acceptor also be 115v? Or, would it be 24v like the coin mech? There is an unused 3 pin plug coming from the control board. Any info about the correct validator would be appreciated.

Regards,

Vic

Check this site and see if they have a manual for your machine and see if there's info on a validator.
www.vendnetusa.com/manuals
John
Back to Snack & Soda Vending Chat Room



Also tagged with one or more of these keywords: bill validator, USI, drink vending, soda vending

  1. Vendingchat.com - All Vending Forums and Bulletin Board
  2. → All Vending Forums
  3. → Snack & Soda Vending Chat Room
  4. Privacy Policy
  5. User Rules & Guidelines ·