Dixie Narco 348
Started by jordan57, Aug 17 2012 10:17 PM
2 replies to this topic
#1
Posted 17 August 2012 - 10:17 PM
Hello,
I recently purchased a used DN 348 machine. It cools great.
It takes coins but will not dispense anything. I loaded cans in several bays and the lights go off by the buttons.
If I open it up and manually press the switch by the motor it will dispense the a can.
The machine accepts the coins and knows it has the right amount, because it wont take more coins and if I dispense manually it will accept coins again.
So it seems like the button is not communicating with the motors.
Any ideas.
Thanks,
Brian
I recently purchased a used DN 348 machine. It cools great.
It takes coins but will not dispense anything. I loaded cans in several bays and the lights go off by the buttons.
If I open it up and manually press the switch by the motor it will dispense the a can.
The machine accepts the coins and knows it has the right amount, because it wont take more coins and if I dispense manually it will accept coins again.
So it seems like the button is not communicating with the motors.
Any ideas.
Thanks,
Brian
#2
Posted 18 August 2012 - 10:48 AM
Check the wiring connections on the selection switches. Check all connections on the middle switches on the motor, may need to double check these 3 times.Hello,
I recently purchased a used DN 348 machine. It cools great.
It takes coins but will not dispense anything. I loaded cans in several bays and the lights go off by the buttons.
If I open it up and manually press the switch by the motor it will dispense the a can.
The machine accepts the coins and knows it has the right amount, because it wont take more coins and if I dispense manually it will accept coins again.
So it seems like the button is not communicating with the motors.
Any ideas.
Thanks,
Brian
vend1ng
#3
Posted 20 August 2012 - 03:29 PM
Ya, it was a loose connection on one of the motors. Missed it my first time thru.
thanks
thanks