Good to know on the coinco coinmech

Locker with a Lock wouldn't have worked too well for what im doing.. Because people buy randomly though out the day..

But thanks for the insight RJT!

Some follow up with this machine and the Manufacturer..

1. I ordered The missing spacers for my machine.. ($20.00 per set) I placed the order on 7/1 and then went out on vacation.. When I came back on 7/13 to my dismay I only have *1* spacer.. Which is about as useful as having none.. I call up support and told them about the issue and they said that they are sold that way.. I asked the guy if the machine required a spacer in both front and back and he said yes. So then I asked him "So if I requested a *set* for C3 why did you guys send me only half of the set?" and his response was that was how it was sold.. Then I told the guy that it was a rip off to sell something so simple for such a expensive price, it took some arguing for them to admit there was something wrong with the shipment.. Long story short (yea it gets longer) they are sending me the other part to the set but I live in California and they are in NY and it will take 3-5days to get here.. Making that slot in my machine useless that much longer.. They refuse to expedite the part unless i paid for the expedite services.

5. I talked to support and they informed me my bill accepter *should* read $5.00 bills at lest the old style bills.. After testing this it was proven to be wrong I tried 10 different $5.00 Bills new and old and none of them worked. But apparently I can pay a service fee and send in the bill accepter somewhere local and have it reprogrammed to accept the new $5.00 Bills..


Also I paid the $10.00 for a copy of the Manual for the machine.. Seams my partial manual wasn't missing much except the un-boxing of the machine when new. The price of this manual is way too expensive for how simplistic it is..

The spacers for this machine are way too expensive as well..

Some follow up on this..

The vendor -FINELY- got there machine out of my shop (after 2weeks of saying they will and not doing it..)

1. seams the 16oz cans would work.. but there too short (height wise) and I seam to be missing the re-sizer plates. So even after filling the whole front portion with cans.. it still reads as sold out and refuses to vend that slot..

2. figured this out.. it does take a bit of a tug (down) then forward (toward yourself) to pop the middle separators to stock the back portion of the slots.

3. After getting the machine open and stocking it I looked around the inside.. I am in fact missing the plates that let you resize the height for the 20oz slots.. this going to make things hard (right now i cant vend from the .5L slot or the 2 20oz slots)

4. Cigarettes are indeed barely too wide to put in the candy bar slots, soft packs might work.. i only tried the Boxed ones because thats what would have been in the machine.. But they do seem like they would work fine in the chip bag slots..

5. Didn't get to try this but don't really care now seams most common bill will be a $1.00 anyhow..

31 Views and not even someone to poke fun at me?

*Bump*