8 replies to this topic

[mrnapolean1]

I have a Royal RVCC804 that is currently setup to vend Bottles. I want to setup to vend cans but I am unsure on how to do this. I am not falilar with the Royal brands.

 

Here is a picture: Its the one on the left hand side. (coca-cola)

 

The other one is a Cavalier C8-392 that I may have to find a compatible compressor/refirigeration deck for.

Its thread: http://www.vendingch...?showtopic=3952

[AZVendor]

Go to the Royal Vendors website and download the manual for the GIII machine.  There will be instructions in it for product setup.  If you still need help post again and I can explain it to you.  There may even be a diagram in the machine to guide you.  You will basically change the setup to small diameter products and change the depth setting for each column from 1 deep to 2 deep.

[mrnapolean1]

Go to the Royal Vendors website and download the manual for the GIII machine.  There will be instructions in it for product setup.  If you still need help post again and I can explain it to you.  There may even be a diagram in the machine to guide you.  You will basically change the setup to small diameter products and change the depth setting for each column from 1 deep to 2 deep.

 

This is the one I have downloaded: http://www.royalvend...als/giii230.pdf

I am not familar with this setup.

[AZVendor]

Unless you are out of the US, that is the wrong manual as it is for a 230V machine that would be exported.  You want one of the other GIII manuals based on your serial number (found on the outside of the door).  There is a GIII manual for serials below 201134 http://www.royalvend.../giiimanual.pdf and then a GIII Plus for serials over 201135 http://www.royalvend...ls/giiiplus.pdf . 

[mrnapolean1]

Unless you are out of the US, that is the wrong manual as it is for a 230V machine that would be exported.  You want one of the other GIII manuals based on your serial number (found on the outside of the door).  There is a GIII manual for serials below 201134 http://www.royalvend.../giiimanual.pdf and then a GIII Plus for serials over 201135 http://www.royalvend...ls/giiiplus.pdf . 

 

I am stil usure about what manual I need. Here is a picture of my Label:

 

Its not supposed to be sidways. Sorry about that!

[AZVendor]

You want to use the manual for s/n before 201134 because that is the 34th week of 2011 and your machine is much older since it's using the old style serial number format.

[mrnapolean1]

You want to use the manual for s/n before 201134 because that is the 34th week of 2011 and your machine is much older since it's using the old style serial number format.

 

How old is this machine?

[AZVendor]

That was built in the 3rd quarter of 1998.

[mrnapolean1]

That was built in the 3rd quarter of 1998.

 

Thanks.