I have a Coinco 3341-S coin mech in my Dixie-Narco soda machine that recently stopped accepting coins. They fall straight through to the coin return.
Is this something I could repair or is it easier to just replace it?
Posted 08 May 2015 - 06:59 PM
I have a Coinco 3341-S coin mech in my Dixie-Narco soda machine that recently stopped accepting coins. They fall straight through to the coin return.
Is this something I could repair or is it easier to just replace it?
Posted 08 May 2015 - 11:18 PM
You may have a jammed motor, a bad motor switch or a bad motor brake that prevents the motor from getting to a home position. If all your motors and their switches look the same with the short switch arm in a notch of the timing cam and the long arm on the outer edge of the cam, then you could have a bad coin mech. In that case you should test the mech in another machine or test another mech in this machine.
If you need any parts for this or a replacment mech you can PM me for information.
Posted 09 May 2015 - 11:44 PM
Try unplugging mech and plugging back in.
Make sure to unplug machine first though.