Jump to content

Close

jblvending

Member Since 07 Nov 2005
Offline Last Active Sep 03 2013 08:30 PM
****-

Posts I've Made

In Topic: Why Won't Lance Work?

14 February 2013 - 05:50 PM

Because it's outdated and doesn't accept dollars, now if this is for personal use, then by all means repair the coin mech.

In Topic: Why Won't Lance Work?

19 January 2013 - 09:15 AM

Appears to be a bad coin mech, I'd start with repacing that, and if it still does it, then it's your control board. Too be honest with you, I'd replace the machine.

In Topic: Old but decnt looking Pepsi machine given to me (With pictures)

12 January 2013 - 12:56 PM


Got to figure out the compressor issue first.

check and make sure your fan motor is not blocked

In Topic: Rowe 5900 Help!

12 January 2013 - 12:49 PM

Turn the machine off, before you turn the machine back on, have the $1.00 button pressed down, hold that button down as you turn it back on for at least 5 secounds, then release it, should be able to reset after that process.

In Topic: Need help opening older Vendo drink machine

24 December 2012 - 10:44 PM

Titanium drill bits is what your going to need, start with your smallest bit centering it in the center of the key hole, , try to go as deep as you can without breaking the bit( your going to break a few), after you get halfway, go to the next size bit and follow the same procedure.This may take some time, and bits, but once you get to 1/4 inch bit you will eventually break the lock free.
  1. Vendingchat.com - All Vending Forums and Bulletin Board
  2. → Viewing Profile: Posts: jblvending
  3. Privacy Policy
  4. User Rules & Guidelines ·