2 replies to this topic

[jordan57]

Hello,

I recently purchased a used DN 348 machine. It cools great.

It takes coins but will not dispense anything. I loaded cans in several bays and the lights go off by the buttons.

If I open it up and manually press the switch by the motor it will dispense the a can.

The machine accepts the coins and knows it has the right amount, because it wont take more coins and if I dispense manually it will accept coins again.

So it seems like the button is not communicating with the motors.

Any ideas.

Thanks,
Brian

[vend1ng]

Hello,

I recently purchased a used DN 348 machine. It cools great.

It takes coins but will not dispense anything. I loaded cans in several bays and the lights go off by the buttons.

If I open it up and manually press the switch by the motor it will dispense the a can.

The machine accepts the coins and knows it has the right amount, because it wont take more coins and if I dispense manually it will accept coins again.

So it seems like the button is not communicating with the motors.

Any ideas.

Thanks,
Brian

Check the wiring connections on the selection switches. Check all connections on the middle switches on the motor, may need to double check these 3 times.
vend1ng

[jordan57]

Ya, it was a loose connection on one of the motors. Missed it my first time thru.

thanks