#1
Posted 18 November 2012 - 10:54 AM
I SWAPED OUT THE COIN MECH AND THE SAME THING HAPPENS. SO I KNOW ITS NOT THE COIN MECH.
IM STUMPED
MODEL MC5000
#2
Posted 18 November 2012 - 01:10 PM
John
#3
Posted 18 November 2012 - 01:41 PM
its a older crane 147
can i tune this mech its a mc5000
#4
Posted 18 November 2012 - 05:43 PM
the 5000 is not field tunable.I had almost the exact same thing,I put in a refurb 6000 in and haven't had a problem since.the reason the mech will give change is the acceptor portion is out of the loop.I swapped out the cion mech from another machine and put the one that i think was bad into the other machine and it works. so i dont think its the mech. whats funny is that when i put a dollar bill in it and select a item it gives me change from the coin mech. Does that mean that the coin mech is working ????. what i did notice is that every now and then it would take a coin but after the first coin it wont take another it would just fall to the return bin and it takes a few minutes before it says i have a credit for the coin it did take.
its a older crane 147
can i tune this mech its a mc5000
John