ok i know i ask alot of questions but i recently bought a d-n 368 with no validator and there isnt alot of room to mount one on there. im trying to find the smallest one that works worth a darn. my ba30 is too tall for it. and there is alot of plastic on the front not alot of metal. unless i take the catch can out and mount it down there then i run into the power cords being long enough. and advice on a small validator?
bill validator
Started by caliwakeboarder, Nov 20 2008 08:56 PM
4 replies to this topic
#1
Posted 20 November 2008 - 08:56 PM
#2
Posted 03 December 2008 - 08:51 PM
Hi there,
Who would know better then the manufacturer? Call Dixie Narco direct. They have a great tech support team and it's free. All they ask for is the make/model/serial # from the machine.
Toll Free: (800) 688-9090
Monday through Friday from 8:00am to 6:00pm EST.
Hope this helps. Maybe try a mars validator?
Richie
Who would know better then the manufacturer? Call Dixie Narco direct. They have a great tech support team and it's free. All they ask for is the make/model/serial # from the machine.
Toll Free: (800) 688-9090
Monday through Friday from 8:00am to 6:00pm EST.
Hope this helps. Maybe try a mars validator?
Richie
#3
Posted 06 December 2008 - 08:20 PM
thank you for the reply we did dome cutting on the inside braces and we were able to get a ba30 mounted to the inside now i just need to fix the coin changer because they were not talking the other day.
#4
Posted 13 January 2009 - 09:22 PM
#5
Posted 14 January 2009 - 03:56 PM
ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh