Upon you plugging this into a wall outlet, is the evaporator fan (one on the very bottom near to compressor) supposed to be on? It doesnt appear to turn on.....
Quick question about Royal RVCC804-9
#1
Posted 03 November 2013 - 10:01 AM
#2
Posted 03 November 2013 - 12:10 PM
The evaporator fan is the one inside the cabinet under the delivery chute and should be running all the time. The fan in front of the compressor is the condenser fan and it only runs when the compressor is running. There is a 3 minute or so delay after closing the door before the compressor will start. The compressor also turns off when opening the door. These events occur to prevent moisture from freezing on the evaporator due to condensation by opening the door.
#3
Posted 03 November 2013 - 12:50 PM
The evaporator fan is the one inside the cabinet under the delivery chute and should be running all the time. The fan in front of the compressor is the condenser fan and it only runs when the compressor is running. There is a 3 minute or so delay after closing the door before the compressor will start. The compressor also turns off when opening the door. These events occur to prevent moisture from freezing on the evaporator due to condensation by opening the door.
OK. Thanks. Im not familar with Royal machines.
So I need to close the door and wait 3 minutes and the compressor will kick on?
#4
Posted 03 November 2013 - 02:29 PM
Yes, there is a delay on all newer machines to allow any condensation on the evaporator fins to run off before the compressor starts.
Also tagged with one or more of these keywords: royal, vending, machine, soda, coke, compressor, fan, evaporator, condensor, freon
All Vending Forums →
Snack & Soda Vending Chat Room →
Another Good Year at China VMF 2017Started by chinavmf, 15 Mar 2017 China VMF, VENDING |
|
|||
All Vending Forums →
Vending MACHINES Info & Ads Chat Room →
Selling machinesStarted by Lester Johnson, 21 Nov 2016 Vending, Ice&water |
|
|||
All Vending Forums →
Snack & Soda Vending Chat Room →
Live Technical Support From A&M Equipment Sales.Started by Leo Bartolon, 28 Oct 2016 vending, technical support, free and 7 more... |
|
|||
All Vending Forums →
Snack & Soda Vending Chat Room →
C-51 Cavalier Compressor Massive Amp DrawStarted by marquiskissel, 31 May 2016 cavalier, repair, compressor |
|
|||
All Vending Forums →
Vending MACHINES Info & Ads Chat Room →
Vending machine market is booming in ChinaStarted by chinavmf, 25 Dec 2015 vending, China VMF |
|