2 replies to this topic

[Vic]

Hello...

I have a Vendo 721 ten selection live display drink machine and I am having trouble deciphering the programming directions in the manual. Specifically, the manual refers to buttons 1, 2, and 3 for use in programming. Are these the first three buttons in the top row? Left to right? Or two top buttons and one on the bottom? I want to set it up for some cans and bottles and have to set the columns, depending on what will be vended, 1, 2 , 3 or 4. I don't get it. When the machine is on and I hit the service mode button, I get eror in the display but hitting the buttons doesn't do anything until I push button 4...then the display reads chng which may refer to adding change to the coin mech.

Any advice on programming this thing would be appreciated.

Regards,

Vic

[Vic]

Success! Not too difficult once I figured out that buttons 1 to 3 refers to the three buttons top row on the right, moving to center. That is, button #1 is on the right, next to the bill acceptor, button #3 is the center button on the top row. This does not make intuitive sense to me, but everything now seems to work, prices set, etc. I don't think I'll bother with all of the other settings and features possible...at least not now.

Regards,

Vic

[cvending]

Vic, there shoud be a diagram on the inside door for programming on that machine. Depending on the packages you are vending, they can be 1, 2, 3 or 4 deep per column. I believe that cans will be the only thing you can put in the 4 deep setting. There is also individual pricing per column. All the programming is done with those 3 buttons.Button #1 operates column #1(extreme right hand), #2 is next,etc.
Playing with it will be the best learing tool for you.