after looking at it for awhile i traced it to a broken wire on the light bulb holder. when the door was opne it was pulled away from any metal but when the door would shut sometimes the break would make contact with the meatl causing the breaker to go, thanks for all the help and suggestions from everyone
yeah i have one machine at my office that is set at 50 cents and the bulk candy machine is up against it and they are more likely to spend the whole dollar on a soda and a handfull of peanut mm`s, but the rest of my machines are 65 to 75 cents
im not sure about texas but here in california I was told I needed a buisness license. so i got one from my local town and went to the bank and opened a seperate account for the buisness just so things can stay simplier.
i personally dont have any of those machines, but they seem fairly easy to run and work on. I would look around alittle more I have seen the same machine on ebay for 250 or less and not sale. i would look around alittle bit more first and maybe see if you can line up some spots to place the machine at. because an unplaced machine isnt doing you any good but taking up space.
ok well i bought a rebuilt coin mech on ebay and placed it in the machine and filled it with a few coins, and hooked the validator up to it. i was able to buy soda with change but it still wouldnt give sodas with bills. i hooked up the ba30 with the 9 pin adapter and hooed to the coin mech. when you put a bill in it sounded lilke it was cycling the bill twice. its strange because i pulled the ba30 out of a working machine. so i have a old maka that im gonna try to hook up to the coin mech and see if that is the problem. any other suggestions?
Find content
Not Telling
