Jump to content

Close

Venice Beach Villas

Member Since 28 Jun 2009
Offline Last Active Oct 28 2009 05:33 AM
-----

Topics I've Started

Dixie Narco won't stop dispensing cans - help

27 October 2009 - 03:55 AM

Dixie Narco 276cc/S11-6

After I press a button to select the soda it kicks out the first one, then continues kicking them out and doesn't stop. Unplugging it is the only way I can get the motor to stop vending. I have tried resetting by many programming resets on the SIID controller and the service push button towards the top.

Problem randomly happened after refilling cans only.

Any help would be greatly appreciated. OK to e-mail direct as well to kevin_klasing@yahoo.com . Thanks.

Need Help Trouble Shooting - DNCB 276 stopped cooling

28 June 2009 - 02:31 PM

I need your help. I have an older DNCB 276 machine that stopped cooling.

The compressor is still humming, all fans are still running, the condenser is hot, the evaporator coils are not cold, the accumulator is not cold. the small diameter copper wire tube and coil is hot.

Hopefully that is enough information to get started with trouble shooting tips, ask more questions or point me in the right direction. BTW, I went to the Dixie Narco web site and the primary manual on-line excluded the troubleshooting section.

Many Thanks

-Kevin
  1. Vendingchat.com - All Vending Forums and Bulletin Board
  2. → Viewing Profile: Topics: Venice Beach Villas
  3. Privacy Policy
  4. User Rules & Guidelines ·