Most of the time just replacing the coin slides on the bottom of the unit will take care of the problem. They are cheap about $1 each. You can find them at http://www.coinvalparts.com
About Me
Community Stats
- Group Members
- Active Posts 106
- Profile Views 14,832
- Member Title Advanced Member
- Age Age Unknown
- Birthday Birthday Unknown
-
Gender
Male
-
Interests
Helping people understand and repair their own equipment.
- Website URL http://www.coinvalparts.com
Posts I've Made
In Topic: No/Wrong Change being given
12 February 2014 - 07:53 PM
In Topic: Vendo 407 (?) MAKA NB-15 Bill Validator quit
10 February 2014 - 01:20 PM
What kind of coin changer is in the machine? If it is a Mars 6800H you have a lot of inexpensive options. The cheapest repbuilt we sell is $74.95...but that is an older unit and any of those do NOT have new replacment parts available. We use old units to repair old units as the only parts you can get new are belts. Let me know the coin changer model, and we'll see if there is something out there for you.
In Topic: DN 501 E no longer cooling after recharging
20 July 2013 - 06:31 PM
We repair 100's of decks a year. The small leaks are almost impossible to find...but we always use a dip tank and complety submerge the deck (all external electrical items removed). If an access valve or tapping valve is left on a unit, that is a leak waiting to happen. If it is sealed, most often there is a small pin-hole leak in the evaporator coil and we replace it. Once again if you leave a tapping valve on a unit 9 times in 10 it will leak out. Just FYI
In Topic: ROWE 4900-JR Dollar and Coin mech
20 July 2013 - 06:27 PM
Also be sure to check all your harness connections. Follow the one to the bill acceptor and make sure no plugs came loose during the move to your new location. We see that issue a lot with the 4900 and 5900.
In Topic: COINCO BA30B Stacker Problem
20 July 2013 - 06:18 PM
We can fix it for a flat rate if you want...click here
- Vendingchat.com - All Vending Forums and Bulletin Board
- → Viewing Profile: Posts: validatorman
- Privacy Policy
- User Rules & Guidelines ·