Jump to content

Close

Putz

Member Since 03 Nov 2010
Offline Last Active Jan 18 2011 05:49 AM
-----

Posts I've Made

In Topic: voltage problems

18 January 2011 - 05:53 AM

Soda machines like their own breaker they can pull 15 amps when the compressor kicks in.Recommend a separate outlet on it's own breaker.

In Topic: Vending coin mechanism not accepting coins

16 January 2011 - 10:18 AM

Do you have a bill validator on this machine if both aren't communicating and working properly coin mech will not work.Try different validator

In Topic: more profit

22 December 2010 - 05:41 AM

Cans are easier to set up in machines due to most being the same shape but when freeze you have garbage. Bottles can get a little froze with no damage.You can also get cans at some sales really cheap where bottles don't usually go on those like cans in 12 packs do.These prices are cheaper than small guys can get from bottlers.JMO

In Topic: Honer boxes

11 December 2010 - 08:46 PM

I have been with this vending company for 5 months and we had two machines people have vandalized in a small northwoods wisconsin area. One was a glass front quite a bit of damage with broken glass the soda vending machine they tried but never got in very little damage. New plastic front and lock assembly is all.

In Topic: NEW TO VENDING NEED ADVICE

04 December 2010 - 09:14 AM

What dondon said earlier about using at leasy six sodas you could just test the motors by holding the switch in in the column.Sometimes we just put little wedges on the motor side to hold the switch also and test them all.