Jump to content

Close

SNG

Member Since 24 Nov 2010
Offline Last Active Aug 21 2011 08:22 PM
-----

Posts I've Made

In Topic: Soda and Snack Machines

21 February 2011 - 06:26 AM

I would never recommend using an extension cord. But circumstance often dictates. If you must use an extension cord never use anything less than a 12/3 cord and never go over 25'. 10' would be more acceptable. Just a thought.
Vending

Thanks, Vending

In Topic: Snack Machines

19 January 2011 - 12:44 PM

The AP111 is indeed a newer version then the AP6000. The 6000 was a shallow machine and the 6000XL was the full depth. Unfortunately, most people do not differentiate between the 6000 and 6000xl.

DO you get the location too??

The location may be available, but i already had a location set up for it. Do you recall if the AP-111 was a shallow cabinet and did it have a gum rack.

Thanks

In Topic: Snack Machines

19 January 2011 - 06:39 AM

[quote name='Technivend' timestamp='1295379595' post='8469']
Good choice ;)
[/quote
OK, So I went and looked at the AP-6600 machine, on the ID tag inside the machine was ID as AP-Snackshop 111, is a 6600 and snackshop-111 the same machine, I am thinking that the snackshop 111 is a bit of a newer model. The machine was in good refurbished condition, the cabinet was of a shallow model and there was no gum rack.
Does this make sense, is the snack shop 111 a newer model and would it have been a shallow cabinet without the gum rack.
Thanks for all the info so far.

In Topic: Snack Machines

18 January 2011 - 06:10 AM

[quote name='Technivend' timestamp='1295306532' post='8461']
How are they selling them? Reconditioned, checked and working or as-is?
[/quote
The AP is on location working stocked with product ( The product comes with it ). The USI is under a guys car port, he says everything works ( i think i am passing on the USI ). I will go and look at the AP.

In Topic: Snack Machines

17 January 2011 - 05:09 PM

The AP6600 is a workhorse. Yes it is geting on in years but there are plenty of non-oem parts available for it. The USI Snackmart 2 on the other hand is old enough that parts availability is extremely limited.

However, for the right price anything can be a bargain.....

I have not seen the machines in person, they are from two different sellers. They are asking $850.00 for the AP-6600 and $500.00 for the USI. These prices were reduced from original asking price. What do you think.