Hello,
Just wanted to know if anyone has used a locator to place a rack and if so who have you had the best experience with? It seems these are alot harder to place so I am looking for some advice as to the best way to go about it.


Thanks,

Hello,
We purchased our first flat vend sticker machines and are in the process of loading the machine. We tested the machine after loading the stickers and one of our columns is not vending correctly and is missing vends. Each sticker comes in a card board white booklet and we would like to know what direction you are suppose to load the sticker booklet: i.e with the binder end towards the front or the opposite direction?

The reason I ask is that we ended up turning it around for one of the columns it finally worked, the other columns seem to work fine the opposite direction. We just don't want to load them incorrectly and have alot of mis vends and thus angry customers...


If anyone has experience with sticker machines I would really appreciate some advice.

Thanks!

Well we bought our first rack today and now would like to begin filling it with capsules and candy. Does anyone know of the best resource to get the best value on capsules and toys? There are alot of sites out there but we do not want to get ripped off and have no idea where to start. Any advice would be appreciated.
Thanks,

Hello all,
We signed up for a charity today and received our " Letter of Authorization" from our 501c charity which proves we are participating in the vending outreach label program and can show this to merchants if they wish to see it. My questoin is can a merchant use our vending machine as a write off since they are allowing us use their space in lieu of a commission? I ask this becuase it seems it would be a good marketing tool to get machines in stores if it was a benefit to them. If anyone knows the answer to this I would appreciate it.

Thanks!

Hello,
Considering adding tatoo machines to our stock but not sure how well they sell. Also does anyone know the best places to look for to place the machines?

Thanks,