Jump to content

Close

cvending

Member Since 28 Apr 2011
Offline Last Active Feb 16 2015 11:09 AM
-----

Posts I've Made

In Topic: dncb 368 3 columns will still vend when empty

23 February 2013 - 10:20 PM

Are there any columns linked together in STS?

In Topic: Snackshop113 not vending

23 February 2013 - 10:17 PM

Sounds like a bad validator (or two). Do you have another to try? Also make sure all connections are secure

In Topic: T handle lock pops open

31 January 2013 - 07:43 AM

This might sound silly, but is it the correct size lock? Some are of different lengths. What kind of machine is it? Can you lock it with the door open? If so, do that and look to see it the tab on the lock is protruding out into the handle. Like I say, it sounds silly but jkust might be the case.

In Topic: Validator problem on DN 368

20 December 2012 - 11:07 AM

I would repair validator, not replace it. I believe price is less that $50 with a years warranty. All depends upon your location.

In Topic: Transporting Machine?

13 December 2012 - 04:02 PM

If the machine has a compressor in it, you will need to have it placed upright for 24 hrs before plugging it in. The oil in compressor needs to settle/drain back down before running.
  1. Vendingchat.com - All Vending Forums and Bulletin Board
  2. → Viewing Profile: Posts: cvending
  3. Privacy Policy
  4. User Rules & Guidelines ·