Jump to content

Close

kimbokasteniv

Member Since 09 May 2011
Offline Last Active Oct 27 2012 03:25 PM
-----

Posts I've Made

In Topic: DN 501R change cams for vending glass bottles

26 October 2012 - 02:47 PM

Alright, I took a look at the machine and I think I finally understand how this stuff works--this must be vending 101. I never noticed the difference in design towards the back of the column which prevents the product from dispensing until the motor moves a little bit further.

Otherwise I tried the wide column, and it worked as you suggested.
Thanks again.
I don't suppose you sell the motor I have pictured above? I only need the disk, but from what I have seen online that's not sold separately.

In Topic: DN 501R change cams for vending glass bottles

25 October 2012 - 06:27 PM

Kimbo, to me it looks like the lower picture shows that the depth of the column is only single. The back spacer needs to be adjust back so you can put 2 bottle deep in the column.

Good lucl


You're right, I moved that spacer forward, because frankly, I don't understand how it could only vend a single bottle if the bottles are placed 2 deep.
So are you suggesting, that if I move the spacer back and place the bottles 2 deep, the cam position which only vended a bottle every two cycles would now vend every cycle?

Edit:
I just imagined the way the dispenser moves, and now I realize why what you suggested would work. Thanks again, I feel like an idiot for not realizing that.

In Topic: DN 501R 4 to 7 segment display programming.

04 October 2012 - 09:29 PM

Got a PM from Steve who happened to have exactly what I needed:
https://docs.google....ZUVvTDAyWE5zRVE

I'm posting it, along with some keywords, for anyone else who lands on this page via google in the future.

Dixie narco lcd display problem. SIID (S2D) controller.
  1. Vendingchat.com - All Vending Forums and Bulletin Board
  2. → Viewing Profile: Posts: kimbokasteniv
  3. Privacy Policy
  4. User Rules & Guidelines ·