Jump to content

Close

kimbokasteniv

Member Since 09 May 2011
Offline Last Active Oct 27 2012 03:25 PM
-----

Topics I've Started

DN 501R change cams for vending glass bottles

25 October 2012 - 12:21 PM

I have a dixie narco machine which I would like to use to dispense snapple bottles. As you've guessed I don't know much about vending machines, so I need some help selecting the correct cam for the job. (I am assuming the yellow and green piece pictured below is called a cam).

With the current cams, there seems to be two different positions I can use. One position causes the machine to dispense a bottle every 2 vending cycles, while the other dispenses two bottles per vend cycle.

How do I determine the correct cam for the stack?

Any help appreciated.

Posted ImagePosted Image

DN 501R 4 to 7 segment display programming.

04 October 2012 - 11:23 AM

I have a Mars MEI SIID control Board in my machine, and some years ago I went through a short procedure to change the number of display segments the board was expecting.

I can't figure out how to do it again, and I can't find anything online about it either.
I'm sure this is a fairly straight forward procedure.

Any help is appreciated, thanks.
  1. Vendingchat.com - All Vending Forums and Bulletin Board
  2. → Viewing Profile: Topics: kimbokasteniv
  3. Privacy Policy
  4. User Rules & Guidelines ·