Thanks for the info. It's an S2DE board, it originally had an S2D. There are in fact 10 columns but maybe I need to confirm there is in fact no jamb on the far left column not the Far right column. There were a couple of buckets in the middle out of synch showing column jams that cleared once I rotated them.
I have 2 pdf's on the subject from 14 to 7 segment and 7 to 14 programming. Give me your email address and I'll forward them to you. I recently went through the same thing.
Sound like your clips on the gauge bar aren't right. If it had 20 oz bottles it used black clips with squeegies on them. Cans require 2 white clips for 3 deep cans. The 16.9 oz bottles should work fine 2 deep with no clips at all but they need a can shim to keep from jamming the loading gate.
Dude, you've got a real problem here. I have a DN 501E machine with an sd2e controller and they definitely require a 24V MDB coin mech and Bill Validator NOT 117V. Your validator looks like a BA 30 validator not a BA 50. A BA30 is 117V. A 50 or 52 is 24V and uses a different plug. Did it EVER work right?
You need to buy a different validator, there are a million for sale on ebay for about $40-50
Find content
Not Telling
