4 replies to this topic

[stang32]

i  HAVE A VENDO SODA MACHINE

 

the info on the door tag is

model 516307004   930419

serial # 201578

 

my machine  is going nuts, 1 product keeps rotating on & on & on. I swapped out the micro switches on the rotating mechanism on the front of the product chambers & it still does the same., if I pull down on the piece of  brass, it will stop rotating & if Ipull down on it @ the right location, when the micro switch is tripped, it will stop trying to spin, i am assuming it is something in the  electro magnet. i moved the mechanism to  another product & the problem followed.

[AZVendor]

This means you probably have a bad motor brake and you need to replace the motor.  If you'll PM me the color of your motor timing cams I can send a motor to you.  This presumes, of course, that you have properly attached the wiring connectors to your switches.  If you have missed the side (common) terminal then the switch won't perform it's function.

[All Pro Vending Locators]

AZVendor.....I have the same issue but I did replace the motor.  Any other suggestions?

[AZVendor]

That's either a bad motor or motor switch.  If you know that the new motor is good with a good motor brake then you have a bad switch or a broken wire somewhere between the motor switch and the logic board.

[All Pro Vending Locators]

Ok thanks.